# qvidcap
# Autogenerated from man page /usr/share/man/man1/qvidcap.1
complete -c qvidcap -s d -l device -d 'Use device <dev> as the video device if <dev> is a number, then /dev/video<de…'
complete -c qvidcap -s f -l file -d 'Read from the file <file> for the raw frame data'
complete -c qvidcap -s p -l port -d 'Listen for a network connection on the given port.  The default port is 8362'
complete -c qvidcap -s T -l tpg -d 'Use the test pattern generator'
complete -c qvidcap -s c -l count -d 'Stop after <cnt> captured frames'
complete -c qvidcap -s b -l buffers -d 'Request <bufs> buffers (default 4) when streaming from a video device'
complete -c qvidcap -s s -l single-step -d 'Starting with frame <frm> (default 0), pause after displaying each frame unti…'
complete -c qvidcap -s C -l colorspace -d 'Override colorspace'
complete -c qvidcap -s X -l xfer-func -d 'Override transfer function'
complete -c qvidcap -s Y -l ycbcr-enc -d 'Override Y\'CbCr encoding'
complete -c qvidcap -s Q -l quant -d 'Override quantization'
complete -c qvidcap -s P -l pixelformat -d 'For video devices: set the format to this pixel format'
complete -c qvidcap -s l -l list-formats -d 'Display all supported formats'
complete -c qvidcap -s h -l help -d 'Display this help message'
complete -c qvidcap -s t -l timings -d 'Report frame render timings'
complete -c qvidcap -s v -l verbose -d 'Be more verbose'
complete -c qvidcap -s R -l raw -d 'Open device in raw mode'
complete -c qvidcap -l opengl -d 'Force openGL to display the video'
complete -c qvidcap -l opengles -d 'Force openGL ES to display the video'
complete -c qvidcap -s W -l width -d 'Set width'
complete -c qvidcap -s H -l height -d 'Set frame (not field!) height'
complete -c qvidcap -s A -l padding -d 'set additional horizontal padding (after width)'
complete -c qvidcap -l fps -d 'Set frames-per-second (default is 30)'
complete -c qvidcap -s F -l field -d 'Override field setting'
complete -c qvidcap -l no-loop -d 'Stop at the end of the file, don\'t loop back to the beginning'
complete -c qvidcap -l from-frame -d 'Start playing back the file at the given frame number (the first frame is fra…'
complete -c qvidcap -l list-patterns -d 'List available patterns for use with --pattern'
complete -c qvidcap -l pattern -d 'Choose output test pattern, the default is 0'
complete -c qvidcap -l square -d 'Show a square in the middle of the output test pattern'
complete -c qvidcap -l border -d 'Show a border around the pillar/letterboxed video'
complete -c qvidcap -l sav -d 'Insert an SAV code in every line'
complete -c qvidcap -l eav -d 'Insert an EAV code in every line'
complete -c qvidcap -l pixel-aspect -d 'Select a pixel aspect ratio, the default is to autodetect'
complete -c qvidcap -l video-aspect -d 'Select a video aspect ratio, the default is to use the frame ratio'
complete -c qvidcap -l alpha -d 'Value to use for the alpha component, range 0-255, the default is 0'
complete -c qvidcap -l alpha-red-only -d 'Only use the --alpha value for the red colors, for all others use 0'
complete -c qvidcap -l rgb-lim-range -d 'Encode RGB values as limited [16-235] instead of full range'
complete -c qvidcap -l hor-speed -d 'Choose speed for horizontal movement, the default is 0 and the range is [-3'
complete -c qvidcap -l vert-speed -d 'Choose speed for vertical movement, the default is 0 and the range is [-3. 3]'
complete -c qvidcap -l perc-fill -d 'Percentage of the frame to actually fill.  the default is 100%'
complete -c qvidcap -l test -d 'Test all formats, each test generates <count> frames'
complete -c qvidcap -l test-mask -d 'Mask which tests are performed.  <mask> is a bit mask with these values:'